Dissembler Compact
Please be advised, to ensure the safe arrival of your Dissembler Camera product during shipping, some items will need to be reattached or put into place, after their delivery.
Install Battery: Battery will likely already be installed, if not, place battery by lining up with velcro, while ensuring there is space on the sides and top for the housing to securely close.
Install Hotspot: If the hotspot is not already in the housing, line up the velcro, ensuring the plug is on the left side.
Wire Connects:
Plug hotspot in with the short black wire.
Battery: Plug in female to male black and red wire.
IMPORTANT: Wires must be plugged in red to red and black to black, forcing the wires in the wrong way will cause damage.
Camera: Next, plug the longer black wire into the camera wire. A camera will likely already be installed, be sure to plug it in. You should hear "ready to connect” follow the camera set-up instructions (see link at bottom of this page).
Attaching housing front and back by clipping into place.
For closing the housing, ensure that all the wires are with the case as you close it.
For securing housing in closed position, you can use the small silver piece included with your product. Additionally, you can use a zip-tie as well.
Note: you do not need to open the enclosure when deploying.
Dissembler Compact includes two cameras, please follow the instructions at the links below for set-up:
Follow the steps in the video below to install and/or change out camera.