Wyze Wide & Telephoto OG

Follow the directions below or go directly to the Wyze site.

1. First plug in power wire on battery. Refer to the Getting Started instructions included in box.

2. Make sure the camera is also plugged in.

3. You should hear “Ready to Connect"

4. If you are resetting camera before setup press and hold reset button for 30 seconds

5. Next on your phone download “Wyze” APP

6. Open Wyze APP

7. Click Plus sign on top left

8. Click Add Device

9. Click Cameras

10. Click Wyze Cam OG.

11. Click Next

12. If it is not saying "Ready to Connect" then carefully pop the camera out of case to access the reset button on the bottom of the device. The SD card slot is also located on the bottom as well. Hold the reset button for 5 seconds. You should then hear "Ready to Connect".

13. In the APP check the box It said “Ready...to connect” Then click Begin setup

14. Select a WIFI network. This is needed to set up the camera. The camera will function in the field without WIFI. Enter your password for the WIFI

15. It will now connect

16. Name Camera and click Finish

17. You can add camera plus which gives you more features.

18. You can create or add camera to a group or share the device or skip

19. When done click All Wyze Cam OG are set up

20. After setup click the gear top right to get to the settings, then click Advanced. See images below for recommended settings.

To use the zoom camera, remove the Wyze Wide Angle camera. Then place the inserts in the camera mount. Then place the Wyze Zoom camera in the mount.